08

Openings

08 31

Access Doors and Panels

 

PFI - Fire Rated Insulated Access Door

Additional information

Green criteria

  • Efficient Use of Materials
  • Durable or low-maintenance
  • Post-consumer recycled content
  • Pre-consumer recycled content

Product presentation

The PFI access door is insulated with 2” thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1” flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48’’ x 48’’) and (24’’ x 36’’ or 864 sq inches).

Warranty

Warranty : 1 year against manufacturing defects

Pre-consumer : 19,59%

Post-consumer : 63,21 %

Vertima record number: FVERT-13-1006-02-AN
In effect since: October 2013
Last update: December 2015

Technical Data documented and validated by: Vertima

Final manufacturing location: Montréal, Québec, Canada H1E 6N6

Extraction location of raw materials: Hamilton, Ontario

The PFI – Fire Rated Insulated Access Door from CENDREX can contribute to this credit since up to 87.98% of its components are extracted, collected, treated and recovered within an 800 km or 2,400 km radius (depending on the transportation mean used).
Vertima record number: FVERT-13-1006-02-AN
In effect since: October 2013
Last update: December 2015

Technical Data documented and validated by: Vertima

 

No VOC content

Vertima record number: FVERT-13-1006-02-AN
In effect since: October 2013
Last update: December 2015

Technical Data documented and validated by: Vertima

LEED NC & CS 2009

MR 4 – Recycled content

MR 5 – Regional material

 

Vertima record number: FVERT-13-1006-02-AN
In effect since: October 2013
Last update: December 2015

Technical Data documented and validated by: Vertima

 

 

Information request

  • This field is for validation purposes and should be left unchanged.